Progress: Two LOM Preizor EMF coils wound (350 and 425 turns) and a third very long loop = 1100m Now to terminate & test!
Coil 1 wound
350 turns and coil #1 is wound! LOM Preizor #1 is a step closer – thanks to LOM for making them open source It is both a boring process and one that requires undivided attention… Tomorrow I’ll wind coil #2…
Instrument Building References
I’m currently doing R&D on a physical instrument/sound generator, and my go-to practical reference book has always been this one: Musical Instrument Design – Practical Information for Instrument Making by Bart Hopkins Another book I found recently, ‘rented’…
ULT SOUND DS4 drum pads
Ages I bought a Toyo Gakki DS4 drum synth with four drum pads off TradeMe. I had heard of them before (apparently YMO used one) so I took notice when it was first listed but the asking price was too…
DIY LOM Priezor
Next to wind the coils… Thanks to Ponoko!
DIY
Spent the last week removing and replacing the PVC roof on the porch at the back of my house. The old roof was so old it was brittle and full of holes and cracks, which is what enabled me to…